Thiết bị

Thảo luận trong 'Rao Vặt Toàn Quốc' bắt đầu bởi servicedkv, 29/1/16.

  1. servicedkv

    servicedkv Thành Viên Mới

    Tham gia ngày:
    25/1/16
    Bài viết:
    15
    Đã được thích:
    0
    Điểm thành tích:
    1
    Giới tính:
    Nữ
    DKV Việt Nam (dkv.biz.vn) chuyên phân phối chính hãng sản phẩm Kỹ thuật Công nghiệp về thủy lực - siết lực và hỗ trợ tư vấn những giải pháp Kỹ thuật
    1. TEST LỰC SIẾT, LẮP CHAI, LẮP HỘP


    [​IMG]

    Type: TMI-100
    • Accurate measuring of torque for screw tops, amatures, machinery components and tools
    • High accuracy of 0,5% and accurate recording of peak value under 1000Hz
    • Robust, stable and splashwaterproof (IP42)
    The Torque Meter TMI-100 provides an accuracy of 0.5% in all the available measurement ranges. It is particularly suitable for use in the laboratory and for routine quality measurements in industrial environments.

    The robust sensor module, designed and protected by an overload of up to 150%, a high resolution combined with a very high overload protection and is bidirectional, therefore, torque capture in both directions. The measured values are in a large, reversible display, and optionally in the SI unit newton meter or weight units.


    [​IMG]

    2. Type: TMI-200
    • Accurate measuring of torque for screw tops, armatures, machinery components and tools
    • High accuracy of 0,5% and accurate recording of peak value under 1000Hz
    • Robust, stable and splashwaterproof (IP44)
    • Data memory and USB interface
    • Positive/negative indication through coloured LEDs
    The Torque Meter TMI-200 offers a high accuracy of 0.5% in addition to the ability to compare measured values with reference values and to store data series and statistically.

    It is therefore particularly suitable for use in quality control lab.

    The robust sensor module, designed and protected by an overload of up to 150%, a high resolution combined with a very high overload protection and is bidirectional, therefore, torque capture in both directions.


    [​IMG]

    Type: TMI-300
    • Accurate recording of torque with fast memory for sealings with tamper evident ring
    • High accuracy of 0,5% and accurate recording of peak value under 1000Hz
    • Robust, stable and splashwaterproof (IP42)
    • Data output to printer and USB flash drive
    • Positive/negative indikation through colured LEDs
    The Torque Meter TMI-300 can also be used for the detection of several peaks that occur normally in closures with tamper evident ring. In addition, the device offers multiple ways of storing and evaluating data.

    Optionally, external memory cards (USB Flash), or a printer can be connected.

    It is therefore particularly suitable for use in quality control lab.

    The robust sensor module, designed and protected by an overload of up to 150%, a high resolution combined with a very high overload protection and is bidirectional, therefore, torque capture in both directions.


    [​IMG]
    Accessories:

    [​IMG]

    2. THIẾT BỊ HIỆU CHUẨN LỰC

    [​IMG]

    • The ET-cal Microprocessor Controlled Torque Analysers are for calibrating and presetting medium to large Torque Wrenches (up to 3150 N.m)
    • User modes include Peak, First Peak and Final Peak. Multiple units of measure include N.m, cN.m, lbf.ft and lbf.in
    • A detachable display enables the user to position the screen for better visibility when calibrating longer Torque Wrenches
    • Supplied with RS232 interface to allow realtime download of peak torque value and unit of measurement
    • Robust design can be mounted in horizontal and vertical planes
    • Modular design offers a variety of options to the user including, different size transducers and accessories which can be purchased separately
    • Accuracy +/- 1% of reading, +/-1 digit
    [​IMG][​IMG]
    3. THAM KHẢO THÊM

    4. THÔNG TIN LIÊN HỆ

    card Kích.png
     
    Cảm ơn đã xem bài:

    Thiết bị

    Đang tải...


Like và Share ủng hộ ITSEOVN